Request a Free Quote Now

Electrical Testing Quote

ELTEK Labs has conducted more Electrical Insulation Systems (EIS) and Component Compatibility Testing (CCT) than all other laboratories worldwide combined.

Our collaborative approach to project development combined with our decades of experience makes ELTEK International Laboratories the only electrical insulation testing lab you need.

Our Procedure For Providing A Quote

We start with a brief consultation, either by phone, email, or in person.

If the initial consultation gives us the information we need to start testing services, we prepare a testing quote for you.

If more discussion is needed to determine the scope of your project, we go to the pre-testing services phase. This is for any research, meetings, guidance and recommendations moving forward to decide on the scope of work for your project. A pre-testing services quote is established.

Once you decide on the scope of work for the project, we issue a quote that includes testing services.

Request A Free Quote

Request your free electrical testing quote now by calling us at 636-949-5835 or filling out our online form.

Company Information
Full company name*
Location Address*
Contact person*
First Last
Phone
Email*
Is this the company name and address you would like listed in your final report?
If no, please provide the name and address you would like listed:
Full company name
Attention To
Location Address
Test Information
What test are you interested in?
While we have a few of our tests listed below, we provide hundreds of tests. If you are interested in another type of test please choose "Other".
Tell us more about the test you are interested in
Test Method: ASTM Method D149: Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies.
Test Method: ASTM method D257: DC Resistance or Conductance of Insulating Materials.
Test Method: ASTM method D2303: Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials.
Test Method: ASTM method D3638: Comparative Tracking Index of Electrical Insulating Materials.
Test Method: ASTM method D495: High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation.
Test Method: IEC 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials.
Test Method: UL 94: Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
Your Sample Information for Test Method ASTM Method D149
How many materials are to be tested?
Please provide the following information for each material:
Note: How you list your material(s) here is how we will label them in the final report.
Designation
Fabrication method
Compression molding, cut from sheets, cut from parts, etc.
Thickness
Color
Testing
Which test method is to be used?
Note: If the test method is not specified, testing will be conducted using Method A: Short Time Test.
Preferred measurement units
Which test electrodes are to be used?
If other, please specify type or dimension
Your Sample Information for Test Method ASTM Method D2303
How many materials are to be tested?
Please provide the following information for each material:
Note: How you list your material(s) here is how we will label them in the final report.
Designation
Base chemistry
Specimen orientation
Machine direction, cross-machine direction, warp direction, etc.
Thickness
Surface to be tested
Rough, glossy, smooth, etc.
Testing
Which test method is to be used?
Note: If the electrodes are not specified, testing will be conducted using the tungsten rod electrodes.
Please specify the test voltage
Note: Testing can be conducted at voltages between 1.0 kV and 6.0 kV. If the test voltage is not specified, testing will be conducted at 2.5 kV.
Please specify the starting voltage
Note: If the starting test voltage is not specified, the initial test voltage will be 3.25 kV.
For Time-to-track tests, what test duration is needed?
Note: The default duration is the lesser of 15 hours or until specimen failure occurs. Testing conducted in excess of 15 hours will be charged at a rate of $175/hr, in 1-hour increments.
What is the maximum amount of hours?
Your Sample Information for Test Method ASTM Method D257
How many materials are to be tested?
Please provide the following information for each material:
Note: How you list your material(s) here is how we will label them in the final report.
Designation
Thickness
Note: Specimen thickness must be less than or equal to 0.39 in (10 mm).
Color
Testing
Which tests are needed?
Note: you can select more than one.
If Surface resistance, please specify which side of the material is to be tested:
What test voltage is to be used?
Note: Testing can be conducted at voltages between 100 mV and 1000 V, in 100 mV increments. If the test voltage is not specified, testing will be conducted at 500 V.
Your Sample Information for Test Method ASTM Method D3638
How many materials are to be tested?
Please provide the following information for each material:
Note: How you list your material(s) here is how we will label them in the final report.
Designation
Thickness
Note: Specimen thickness must be between 2.5 mm and 25 mm (0.1 in and 1.0 in).
Color
Surface to be tested
Testing
What is the CTI target rating?
Your Sample Information for Test Method ASTM Method D495
How many materials are to be tested?
Please provide the following information for each material:
Note: How you list your material(s) here is how we will label them in the final report.
Designation
Fabrication Method
Compression molding, cut from sheets, cut from parts, etc.
Thickness
Color
Surface to be tested
Rough, glossy, smooth, etc.
Testing
Which electrodes are to be used?
Note: If the electrodes are not specified, testing will be conducted using the tungsten rod electrodes.
Your Sample Information for IEC 60112 Method
How many materials are to be tested?
Please provide the following information for each material:
Note: How you list your material(s) here is how we will label them in the final report.
Designation
Thickness
Note: Specimen thickness must be greater than or equal to 3 mm. Individual pieces (layers) of material may be stacked to achieve the minimum thickness.
Number of layers
Surface to be tested
Rough, glossy, smooth, etc.
Description of test surface
Please specify machining process
Please specify coating description
Please specify other modification
Electrode test orientation
Please specify type of material characteristic(s), such as molding flow direction, etc.
Please specify other electrode orientation in relation to known material characteristic(s).
Testing
Which tests are to be included?
Test voltage
Note: Testing can be conducted at voltages between 100 V and 600 V (inclusive), in 25 V increments. Test voltages below 150 V may be insufficient to completely vaporize the electrolyte solution.
CTI target rating
Which test solution is to be used?
Note: If the test solution is not specified, testing will be conducted using Solution A.
What cleaning procedure is to be used?
Note: If the cleaning procedure is not specified, test surfaces will be wiped with isopropyl alcohol and dried prior to testing.
If no pre-test cleaning – test only as-received
Please specify what specimens cleaned during preparation
Please specify other cleaning procedure
Your Sample Information for UL 94
How many materials are to be tested?
Please provide the following information for each material:
Note: How you list your material(s) here is how we will label them in the final report.
Designation
Basic chemistry
Color
Note: “Color” refers to a dye, pigment, or other colorant added to the chemistry. If no colorant is added the color is “natural”.
Testing
Which test method is to be used?
Certification
Is the data to be submitted to a certification body?
If yes, which one?
If yes, would you like ELTEK to function as the agent for submittal?
Additional Information
Do the tested specimens need to be returned?
If yes, please specify method of return.
Carrier
Account number
or
- Include return shipping charges in quote amount
Upload Documents
Drop files here or

Max. file size: 64 MB, Max. files: 10.
Maximum file size per document is 10MB. Maximum of 5 files. If you wish to send more files please email them to quoting@elteklabs.com.
If you are visiting this page on an iOS device please note that Apple's iOS software won't allow you to upload your files. Please email them instead to quoting@elteklabs.com.
Any other special notes regarding this project

88181

Electrical Testing Quote

Our Procedure For Providing A Quote

Request A Free Quote

Company Information

Test Information

Your Sample Information for Test Method ASTM Method D149

Testing

Your Sample Information for Test Method ASTM Method D2303

Testing

Your Sample Information for Test Method ASTM Method D257

Testing

Your Sample Information for Test Method ASTM Method D3638

Testing

Your Sample Information for Test Method ASTM Method D495

Testing

Your Sample Information for IEC 60112 Method

Testing

Your Sample Information for UL 94

Testing

Certification

Additional Information

ELTEK International Laboratories

Quick Links